Dascom 1430 User Guide - Manual (Page 31)

Tally Dascom 1430
17
Power-On State
Function
Name
Switch
Operation
LED Function Description
Menu Setup /
EDS [S4] - Allows for Main Menu setting changes. Please read the
instructions printed on how to change settings when this
mode is activated. (EDS: Electronic DIP Switch)
Slip Setup [S3] - Configures the Slip paper profile such as top and left
margins. Refer to Slip Setup section below for details.
Hex Dump [S2] - Beeps once to indicate going into hex dump mode:

Prints data from host in hexadecimal representation.
 Pressing S2 suspends the printing.
 When the hex dump has finished, pressing S2 forces
the printing of the last line of data, as any line
termination control code from host has no function.
 Switch off the power to terminate the hex dump.