Tally dascom 1430 – Dascom 1430 User Guide User Manual

Page 30

Tally Dascom 1430

Offline State

Function Name

Switch

Operation

LED Function

Description

Slip

{S4}

 Press and hold this key until printer beeps twice to activate

the Slip profile mode. L4 will turn on.

 Press and hold this key until printer beeps twice to exit the

Slip profile mode. L4 will turn off.

Exit Dir

{S3}

This is valid for single sheet mode only. It controls the exit
direction of the friction sheet paper.

Load/Eject {S2}

 Load:

Automatically loads the paper (according to path

selection) when no paper is on the platen.

 Eject: For rear tractor, it retracts the form from the platen to

allow users to install cut sheets. (NOTE: Users have to
toggle the path selection lever.)
For cut sheets, it ejects the form on the platen.

Online

{S1}

Toggles between Online and Offline states

Micro Forward

[S1]+ {S2}

While holding down S1, press S2 to micro feed paper up.

Micro Reverse

[S1] +{S3}

While holding down S1, press S3 to micro feed paper down.

Clear Buffer and
Reset

{S4}+[S1]

 Clears the print buffer. Beeps once upon completion.
 Pressing S4 longer initializes the printer to default settings.

Beeps 3 times upon completion.