Dascom DM-220 User Guide - Manual (Page 29)

Tally Dascom DM-210/220
17
3.2.3 Black Mark Setup
Option Function
Without blackmark
No data for seeking black mark commands. You can choose
this option when you do not need black mark function.
Feed black mark after printing Seeking black mark and orientation after printing.
Feed black mark before printing Seeking black mark and orientation before printing.
Black mark setting is reserved for the model with black mark sensor.
3.2.4 Cutter Setup
Option Function Remarks
Without cutter Do not cut paper after printing.
Feed to cutter position for
cutting after page end
Feed to cutting postion of each page
and cut each page respectively after
each page is finished printing.
If your printer does not configure with
black mark sensor or black mark
function is disabled, this option is
invalid.
Feed to cutter position for
cutting after document end
Feed to cutting position and cut paper
till the entire document is finished
printing.
If your printer does not configure with
black mark sensor or black mark
function is disabled, this option is
invalid.
Cut immediately after
printing finished
If you do not setup the cutting
position, paper will be cut
immediately after printing finished.
Cutter setting is reserved for the model with cutter.