Dakota Ultrasonics PX-7 DL - Manual (Page 9)

PX-7 DL Ultrasonic Thickness Gauge
5
The UP arrow key has three functions. When the PX-7 DL is in
calibration mode, this key is used to increase numeric values on the
display. An auto-repeat function is built in, so that when the key is held
down, numeric values will increment at an increasing rate. When MODE is
activated, the UP arrow key scrolls through the various features and
settings of the PX-7 DL. When the data logging feature has been activated
by pressing the MEM key, the UP arrow is used to scroll through the
various files, storage locations, and functions of the data logger. Refer to
page 22 for further information regarding the use o f the UP arrow key and
the data logger.
The DOWN arrow key has three functions. When the PX-7 DL is in the
CAL mode, this key is used to decrease numeric values on the display. An
auto-repeat function is built in, so that when the key is held down, numeric
values will decrement at an increasing rate. When MODE is activated, the
DOWN arrow scrolls through the various features and settings of the PX-7
DL. When the data logging feature has been activated by pressing the
MEM key, the UP arrow is used to scroll through the various files, storage
locations, and functions of the data logger. Refer to page 22 for further
information regarding the use of the DOWN arrow key and the data logger.