Dakota Ultrasonics PX-7 DL User Manual

Page 29

PX-7 DL Ultrasonic Thickness Gauge

Clearing an Entire File

The user may require the contents of an entire file be completely

cleared of all measurements. This would allow the user to start a new

list of measurements starting at storage location L001. The procedure

is outlined in the following steps:

1) Press the ON/OFF key to power up the PX-7 DL.

2) Press the MEM key to activate the data logging functions and

settings.

3) Press the SEND key to enter file setup.

4) Press the UP / DOWN arrow keys to scroll to the file that will be

cleared of all measurements.

5) Press the SEND key once again to select the file.

•

Note: The display will flash the FILE / F-05 ( The file selected by

the user ) symbol.

6) Press the UP / DOWN arrow keys to scroll to the flashing CLr / F-

05 ( The file selected by the user ) symbol.

7) Press the SEND key to select the clear file option. The symbol (

CLr? ) will be displayed.

8) Press the CLR key to confirm and clear the contents of the entire

file.

9) Press the MEM key, at any time, to exit the data logging functions

and return to measurement mode.