Dakota Ultrasonics PX-7 DL - Manual (Page 26)

Dakota Ultrasonics
22
Note: Communications software packages generally have the ability
to capture the screen data to a common text file. This text file,
containing the measurements, can then be imported into any
common spreadsheet program (i.e. Excel

, Quattro Pro

,
Lotus123

) for further reporting requirements.
Using The Data Logger
The PX-7 DL is equipped with an on board data logging feature.
This will prove to be a valuable reporting tool for inspection
purposes. It will increase efficiency by reducing the time it takes to
manually record the measurements during the inspection process.
The PX-7 DL can then be connected to a computer or serial printer
to save and print the results of the inspection.
The PX-7 DL has a storage capacity of 1000 measurements.
The PX-7 DL has 10 files consisting of 100 sequential storage
locations in each file. The procedure for using the data logger is
outlined in the following steps:
1) Press ON/OFF key to power up the PX-7 DL.
2) Press the MEM key to activate the data logger.
§
Note: The display will flash FILE / F-01 (or the last file used)
symbol. Remember, there are 10 files F -01 thru F-10.
3) Press the SEND key to enter file setup.