Dakota Ultrasonics PX-7 DL - Manual (Page 20)

Dakota Ultrasonics
16
PX-7 DL Modes & Features
The Back light
The back light of the PX-7 DL can be set to three different positions
on/off/auto. The following steps outline the procedure for changing the
settings of the back light:
1) Press ON/OFF key to power up the PX-7 DL.
1) Press the MODE key to activate features and settings.
2) Press the UP / Down arrow keys to scroll to the LItE symbol.
3) Press the SEND key to toggle the status of the back light
on/off/auto.
4) Press the MODE key once again to return to measurement mode.
Scan Mode
While the PX-7 DL excels at making single point measurements, it is
sometimes desirable to examine a larger region, searching for the thinnest
point. The PX-7 DL includes a feature, called Scan Mode, which allows it
to do just that.