CounterPath Bria Android Edition 2.1 User Guide - Manual (Page 52)

CounterPath Corporation
48
Network Traversal Strategy
Speak to your VoIP service provider about the strategy to use. Or leave the
default and just change the STUN Server field. Select a profile to set a
specific combination of STUN, ICE, and DNS SRV:
•Default Configuration: STUN On, ICE Off, DNS SRV On.
Bria will use the specified STUN server to discover the public address of your
device. It will present that public address for SIP signaling and when
negotiating media routing.
•Application Managed: STUN On, ICE On, DNS SRV On.
Bria will use the specified STUN server to discover the public address of your
device. It will present your public address for SIP signaling and both your
public and private addresses when negotiating media routing.
•Server Managed: STUN Off, ICE Off, DNS SRV On.
Bria will present your device’s private address for SIP signaling and when
negotiating media routing. Choose this option if your VoIP service provider
advises you that it has implemented a network-hosted NAT traversal (or far-
end NAT traversal) technology such as a session border controller (SBC),
media proxy or RTP relay.
• User Specified: Set the settings as desired.
Audio Input Source This setting controls how the device processes the audio input from Bria. If the person
you are talking to is receiving poor audio, try changing the audio source.
Playback Stream This setting controls how the device processes the audio receiving from the other party. If
you are receiving poor audio, try changing the playback stream.
Verbose Logging Leave this setting OFF unless customer support instructs you to turn it ON in order to
troubleshoot a problem you are having on your device. See page 52.
Send Log Tap to upload the current log to customer support. See page 52.
Delete Log Tap to delete the log files stored on the device.
Field Description
STUN Wi-Fi • On (checked): Bria will use a STUN server to discover your public IP address.
• Off: Bria does not discover your public IP address. Therefore, only the private IP
address will be used. Typically in this case, Global IP should be turned off.
STUN Mobile This setting has the same function as STUN, but applies only when you are connected
over mobile network.
ICE Wi-Fi ICE is involved only in media routing (it is not involved in SIP signaling).
• On (checked): Bria will use ICE to discover addresses for media packets. ICE
provides a good guarantee of two-way audio. However, to use ICE successfully, both
endpoints in a call must use ICE and specifically must use draft 19 of the ICE
standard.
• Off: Try turning ICE off if you are not using Bria behind a firewall or NAT.
ICE Mobile This setting has the same function as ICE, but applies only when you are connected over
mobile network.
Field Description