CounterPath Bria 3.5 Administrator Guide - Manual (Page 42)

38
3.10 SIP Account Properties – Advanced
s
Table 10: SIP Account Properties – Advanced
Field Description
Register Settings
Reregister every The time interval between Bria’s attempts to reregister in order to refresh the account registration.
A value of zero means not to reregister after the initial registration.
This value is placed in the “Expires” header field of the REGISTER message.
The factory setting is 3600.
Minimum time If the reregistration fails, Bria will wait this amount of time, then attempt to reregister. If the
second attempt fails, Bria will wait twice this time and try again, then four times this time, and so
on, until reregistration succeeds.
The factory setting is 20.
Maximum time This is the maximum wait time between attempts to reregister. Once this maximum is reached,
Bria will wait this time for all subsequent attempts.
For example, the min. time is 20 secs, the maximum time is 120 secs. Bria will attempt to
reregister as follows:
• Wait 20 secs.
• Attempt to connect.
• If fail, wait 40 secs.
• Attempt to connect.
• If fail, wait 80 secs.
• Attempt to connect.
• If fail, wait 120 secs (the maximum)
• Attempt to connect.
• If fail, wait 120 secs, and so on.
The factory setting is 1800.