Condux Hand Held Micro Fiber Optic Blower - Manual (Page 20)

20
Recommended Blowing Lubricants
Polywater® Prelube 2000™
Polywater Prelube 5000™
Polywater® Prelube 5000™ is more concentrated than the Prelube 2000™. It is intended for
blowing microcable into small diameter microtubes. The improved chemistry allows this product
to spread further and lower friction low coasting levels. The lower viscosity allows practical
application into the microtubes.
Specially formulated for use with fiber optic cable blowing systems, Polywater
®
Prelube 2000
™
has been
field proven with the Deluxe LW Blower. This lubricant is a special lubricant used to prelubricate the conduit
system before installing the cable. Prelube 2000™ is compatible with all types of cable jackets and
conduit types.
Std
Pkg
Part Number Description Qty
08230600 1 Quart (.9 liter) Squeeze Bottle 12/case
08230601 1 Gallon (3.8 liter) Jug 4/case
08230900 1 Quart (.9 liter) Squeeze Bottle Winter Grade 12/case
08230901 1 Gallon (3.8 liter) Jug Winter Grade 4/case
Polywater® Prelube 2000™ recommended usage quantity
Lubricant Quantity
Duct Size Per 1,000 Feet Per Kilometer
1 inch 3 fl. oz. 300 ml
1.25 inch 4 fl. oz. 400 ml
1.5 inch 5 fl. oz. 500 ml
2 inch 6 fl. oz. 600 ml
Lubricant Quantity
Tube Size (OD/ID) Volume Required Fill Length of Microtube
14/12 0.30 fl. Oz. (9 ml) 3 in. (8 cm)
12/10 0.25 fl. Oz. (7 ml) 4 in. (10 cm)
10/8 0.20 fl. Oz (6 ml) 5 in. (12 cm)
Polywater® Prelube 5000™ recommended usage quantity
Part Number Description Std Pkg Qty
08230675 8 ft.oz squeeze bottle 6/case