Condux Crimp-On Pulling Eyes - Manual (Page 4)

General Information
A. THE CONDUX PULLING EYE
A pulling eye for telephone cable is made of a forged eye pad, a length of tube,
and a barbed spike. When crimping on the end of a cable, it allows you to
successfully pull cable into any type of duct system.
The pulling eye is driven onto the end of the cable and crimped into place.
The crimp takes place between the barbs on the spike, which is inside of the
tube and the tube itself. This crimp grips 100% of the conductors and assures
maximum pulling strength when pulling cable into your duct system. The
pulling eye also seals the end of the cable. This will keep pressure in and
water out.
1.
4