Comelit MT COMELIT VSC IP START SERIES - Manual (Page 29)

Remote configuration can be used to modified device parameter, more specific
operations please refer to device specification manual.
2.5.1.3 Right click to add group node
Right click on icon to add group
Right click on group name to select Delete group to delete it
Select the device channel in the left area, and select specified group in the
right area, click then click to add the channel in the specified
group.
Select the device information in the right area and click to remove
it.
Select the group and click , to sorting it.
2.5.2 Local config
Click to enter into the local configuration page. As figure below: