Comelit MT COMELIT VSC IP START SERIES User Manual
Page 12
Select a serial number and click Config, the following interface will pop out:
Input the cruise name, click Add and select the specified preset, then set the
cruising time and speed. Repeat above operation to add the second and third
cruising point, configurable cruise point numbers depend on front device
supporting.
Select the cruising point number and click Delete to delete the corresponding
cruising point,
After complete the setting, click Save. Click Call to start cruising and click Stop
to close the cruising.
2.1.6.4 Param
Click Param to enter into parameters setting interface: