chiliGREEN 9270D - Manual (Page 92)

Troubleshooting 8-9
I cannot communicate with the computer in the network when
Infrastructure mode is configured.
 Make sure that the Access Point your computer is associated with is
powered on and all the LEDs are working properly.
 If the operating radio channel is in poor quality, change the Access
Point and all the wireless station(s) within the BSSID to another radio
channel.
 Your computer may be in an out-of-range situation. Move your
computer closer to the Access Point it is associated with.
 Make sure that your computer is configured with the same security
option (encryption) to the Access Point.
 Use the Web Manager/Telnet of the Access Point to check whether it
is connected to the network.
 Reconfigure and reset the Access Point.
I cannot access the network.
 Make sure that the necessary driver(s) is correctly installed.
 Make sure that the network configuration is appropriate.
 Make sure that the user name or password is correct.
 You have moved out of range of the network.
 Turn off power management.
Power Management Problems
The computer does not enter Sleep or Hibernation mode
automatically.
 If you have a connection to another computer, the computer does not
enter Sleep or Hibernation mode if the connection is actively in use.
 Make sure that the Sleep or Hibernation time-out is enabled.