chiliGREEN 9270D - Manual (Page 88)

Troubleshooting 8-5
Display Problems
Nothing appears on the screen.
 During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
 The brightness level might be too low. Increase brightness by
pressing the
Fn+F7
hot key.
 The display output might be set to an external device. To switch the
display back to the LCD, press the
Fn
+
F5
hot key or change the
display through the Display Settings Properties of Windows.
The characters on the screen are dim.
 Adjust the brightness and/or contrast.
Bad dots appear on the display at all times.
 A small number of missing, discolored, or bright dots on the screen
are an intrinsic characteristic of TFT LCD technology. It is not
regarded as a LCD defect.
The external monitor displays nothing.
 Make sure that the monitor is turned on.

Make sure that the monitor’s signal cable is properly connected.
 Switch the display to the monitor by pressing the
Fn
+
F5
hot key or
change the display through the Display Settings Properties of
Windows.
Simultaneous display/multi-display does not work.
 Make sure that you turn on the external monitor before turning on the
computer.
 Press the
Fn
+
F5
hot key to toggle through the display options or
change the Display Settings Properties of Windows.