Nvidia 3d shutter glasses kit, B - 18 – chiliGREEN P170HM User Manual
Page 290
NVIDIA Video Driver Controls
B - 18 NVIDIA 3D Shutter Glasses Kit
B
NVIDIA 3D Shutter Glasses Kit
(
for Model D Computers Only)
The NVIDIA 3DVISION shutter glasses kit is supported only by
Model D comput-
ers with a 17.3"(43.94cm) FHD 120Hz eDP panel and GTX 485M video card. Install
the video driver as indicated in
“NVIDIA Video” on page 4 - 6
.
The NVIDIA 3DVISION shutter glasses kit is supplied with a single pair of shutter
glasses and all necessary cables etc. Set up the hardware (run the set up wizard as
indicated overleaf) as instructed in the manual supplied with the kit, however
make
sure you have installed the NVIDIA driver (see
“NVIDIA Video” on page 4 - 6
)
from the
Device Drivers & Utilities + User’s Manual disc. For further details con-
tact your service center.
After the NVIDIA driver has been installed you can setup NVIDIA 3D Vision.
NVIDIA Driver
Install the NVIDIA driv-
er (see
“NVIDIA Video”
on page 4 - 6
) from the
Device Drivers & Utili-
ties + User’s Manual
disc
(to ensure compat-
ibility).
Important Safety Instructions
Make sure you read all the enclosed safety instructions and precautions included in the NVIDIA 3D
Vision Kit before setting up the 3D Glasses and IR Emitter. Follow the setup instructions provided in
the documentation to set up the 3D Vision kit safely and take the “User Vision Test,” which will initiate
when you turn on your GeForce 3D Vision for the first time. If you cannot see the image in 3D during
the test, you should DISCONTINUE USE IMMEDIATELY. Continued use may result in health-related
complications.