chiliGREEN P170HM - Manual (Page 119)

Upgrading The Computer
Upgrading the Hard Disk Drive(s) 6 - 7
6
Removing the Hard Disk from the Primary HDD Bay
Note that only
Model A/B is pictured, however the procedure for removing the pri-
mary hard disk from
Model C/D is the same (note the screw location differences).
1. Turn the computer off, remove the AC/DC adapter, turn it over and remove the bat-
tery.
2. Locate the hard disk bay cover and remove screws & (screw is located
in a different position depending on your model).
3. Remove the hard disk bay cover by levering the cover at point .

RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
Figure 6 - 4
HDD Bay Cover
Screws & Cover
Removal
1 2 2
3
1 2
3
3
For Model A/B
For Model C/D
2
1
3