chiliGREEN P170HM - Manual (Page 123)

Upgrading The Computer
Upgrading the Hard Disk Drive(s) 6 - 11
6
Removing the Hard Disk from the Secondary HDD Bay (Model C/D)
Note that the
secondary hard disk (Model C/D if installed) is located under the op-
tical device bay (CD/DVD).
1. Turn the computer off, remove the AC/DC adapter, turn it over and remove the bat-
tery.
2. Remove the optical device (see “Upgrading the Optical Device (Model C/D)” on
page 6 - 5 )
3. When the optical device is removed the secondary HDD assembly will be visible.
4. Remove screws - from the secondary HDD assembly.

RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
Figure 6 - 8
Secondary HDD
Assembly Screws
1 3
3
1 2