chiliGREEN P170HM - Manual (Page 105)

BIOS Utilities
Advanced Menu 5 - 9
5
Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)
You can adjust the Bluetooth module power setting to your preference. The default
setting (
Disabled) will see the Bluetooth module powered off when the system is
started up or restarted. Enabling the power setting will have the module retain the
last power status (on or off) before any restart or shut down.
SATA Mode (Advanced Menu)
You can configure SATA (Serial ATA) control to operate in
IDE (native/compati-
ble),
AHCI (Advanced Host Controller Interface) or RAID (Redundant Array of In-
dependent disks)
modes from this menu. The SATA Mode should be set BEFORE
installing an operating system, and after you have backed up all necessary files and
data (see sidebar). See
“Setting Up SATA RAID Mode” on page 7 - 2 for details.
Make sure you install the
Intel Rapid Storage Technology application if you have
set the SATA Mode to
RAID or AHCI
“IRST Driver Installation” on page 7 - 8
.
Legacy USB Support: (Advanced Menu)
Choose “
Enabled” if you intend to use USB devices in systems which do not nor-
mally support USB functionality (e.g. DOS). The default setting is “
Enabled” and
does not need to be changed if you intend to use your USB devices in
Windows.

SATA Mode
Selection
If you have installed the
Windows 7 operating
system with either IDE,
AHCI or RAID mode en-
abled, DO NOT disable
the set mode (if you wish
to disable the set mode
you will need to reinstall
the Windows 7 OS).