Caron 6047 User Manual
Page 17
6020 & 6040 Series Operations Manual
Rev E 2/14/2012
Page 17 of 66
Installing Carboy Water System (BOTL301)
Models 6020, 6025, 6040 & 6045 can be purchased with an optional 2.5 gallon carboy
water system. The carboy system is preassembled and shipped inside the chamber.
The four ¼” bolts required to mount the carboy to the unit will be mounted in the left
hand side of the chamber. Remove the carboy assembly from inside the chamber and
attach it to the chamber using the ¼” bolts.
Attach the preassembled tubing provided with the carboy to the water inlet on the rear
of the chamber.
Fill the carboy with water as described in the “connecting a water supply” section of the
manual.
¼” Bolts
(4 total)
Tubing connects/
disconnect to
carboy
Tubing to water
inlet