Caron 6342 - Manual (Page 18)

6320 & 6340 Series Operations Manual Rev G 9/16/2013 Page 18 of 61
Installing Carboy Water System (BOTL301)
Humidified models can be purchased with an optional 2.5 gallon carboy water system.
The carboy system is preassembled and shipped inside the chamber. The four ¼”
bolts required to mount the carboy to the unit will be mounted in the left hand side of
the chamber. Remove the carboy assembly from inside the chamber and attach it to
the chamber using the ¼” bolts.
Attach the preassembled tubing provided with the carboy to the water inlet on the rear
of the chamber.
Fill the carboy with water as described in the “connecting a water supply” section of the
manual.
¼” Bolts
(4 total)
Tubing connects/
disconnect to
carboy
Tubing to water
inlet