Carbolite VCF Series User Manual
Page 10
VCF
10
MF25 – 3.09
Example Element Connections
The diagrams below give schematic examples only of how certain models may be connected,
indicating the number of elements in series; for example, VCF 12/10 240V has two pairs of
elements in series, the pairs being connected in parallel.
Remember to make a plan of your connections - they may differ from these illustrations.
5.8 Fuse Replacement
Fuses are marked on the circuit diagram (section 7.0) with type codes, e.g. F1, F2. A list of the
correct fuses is given in section 8.1. Depending on model and voltage, the different fuse types may
or may not be fitted.
If any fuse has failed, it is advisable for an electrician to check the internal circuits.
Replace any failed fuses with the correct type. For safety reasons do not fit larger capacity fuses
without first consulting Carbolite.
The fuses are near the cable entry point, and access is by removal of the adjacent panel.