Carbolite CR Series - Manual (Page 13)

Clean Room Ovens
MF21 – 3.07
13
8.0 F USES & P OWER S ETTINGS
8.1 Fuses
F1-F2: Refer to the circuit diagrams.
F1
Internal supply
fuses Fitted if supply cable fitted.
Fitted on board to some types of EMC filter. on-board and up to 16 Amps:
32mm x 6mm type F
other: GEC Safeclip
F2
Auxiliary
circuit fuses Fitted on board to some types of EMC filter.
May be omitted up to 25Amp/phase supply
rating. 2 Amps glass type F
On board: 20mm x 5mm
Other: 32mm x 6mm
Customer
fuses Required if no supply cable fitted.
Recommended if cable fitted. See rating label for amperage; see
table below for fuse rating.
Model phases Volts Supply
Fuse Control
Fuse
CR/30 1-phase 220-240 5A 2A
CR/70 1-phase 220-240 7A 2A
CR/130 1-phase 220-240 10A 2A
CR/220 1-phase 220-240 10A 5A
CR/330 1-phase 220-240 12.5A 5A
CR/450 1-phase 220-240 20A 5A
CR/450 3-phase + N 380/220 - 415/240 10A 5A
CR/450 3-phase delta 220-240 15-16A 5A
8.2 Power Settings
All models are designed for a power limit ( OP.Hi ) of 100% with the following exceptions to date:
- any model on 254V or 440V: 89%
-