Carbolite HTMA Series - Manual (Page 3)

High Temperature Ovens
MF16 3.09
3
2.0 I NSTALLATION
2.1 Unpacking & Handling
Lift the unit by its base. The door should not be used to support the equipment when moving it.
Use two people to carry the oven where possible. Remove any packing material from the inner
chamber before use.
Lift the unit by its base. Do not use the door or any other projecting cover or component to support
the equipment when moving it. Use two people to carry the oven where possible. Remove any
packing material from the inner chamber before use, and locate the shelves as required.
NOTE: This product contains Refractory Ceramic Fibre (better described as Alumino Silicate
Wool) for precautions and advice in handling this material see the ‘Repairs and Replacements’
section.
2.2 Siting & Setting Up
Place the oven on a level surface.
Ensure that there is free space around the oven. Ensure that any vents in the oven are not obscured.
Ensure that the oven is placed in such a way that it can be quickly switched off or disconnected
from the electrical supply - see below.