Online manual not for resale purposes – BLITZ Dual SBC Spec R & S User Manual

Page 12

GAIN SETTING

Volume

Mode

without boost spikes or over boosting. If the gain is set too low the boost response may be poor. If the
gain is set to high there may be boost spikes or overboost.

3- Turn the volume button to set gain.

Recommended gain settings

D32A

4G63

**This is only a recommendation.

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be

reproduced, stored in retrevial systems, or transmitted in any form or means with out prior written permission of

Blitz Co., Ltd. (Japan).

Channels will flash Turn

Gain is used to adjust boost response. The gain must be set to achieve the quickest boost response

To set gain:
1- Unit must be in either channel 1, 2, 3, 4, or M.
2- Press mode button and hold for three seconds. The unit will beep. Channels 1, 2, 3, 4 and M should flash.

4- Press mode button to exit.

CAUTION -If the gain is set to high it may cause boost spikes or increase boost pressure.

Vehicle

Motor

Gain

JZA80

2JZGTE

MA70

7MGTE

SW20

3SGTE

FD3S

13BREW

FC3S

13BT

S13/S14

SR20DET

R32,R33

RB26DETT

Z32

VG30DETT

6G72

Z16A

Online Manual Not For Resale Purposes