Barranca Diamond GP6-6 Wheel Cab Maker User Manual

Page 9

GP6-6 Wheel Cab Maker SPECIFICATIONS

Part No:

170553

Weight:

81 lbs (115 lbs. crated)

Main Motor:

Baldor Model

Horsepower:

1/3 HP

Motor Voltage/Frequency:

110 volt/60Hz

Amperage:

3.6 Amps

Motor RPM:

1,800 RPM Fixed

Motor Arbor Diameter:

5/8"

Duty:

Continuous

Motor Arbor Bearings:

Ball Bearings, permanently sealed

Wheel Arbor Flanges:

2" OD x 5/8" bore aluminum

Diamond Wheel Mesh Sizes: 80 and 200 mesh (170 mesh may be substituted)

Diamond Resin Nova Wheels: 280, 600, 1200, and 3000 mesh 6" x 1-1/2" wide wheels

Shaft Type:

5/8" precision machined 4144 steel

Wheel and Blade Flanges:

Aluminum 2" OD x 5/8" bore

Wheel Spacers:

7/8" OD x 5/8" ID aluminum (length varies for wheels and drum)

Convex Polishing End Hub: 6" aluminum hub disc with 5/8"-11" right hand thread

Water Pump:

MK Submersible pump (part #155987), variable flow control with

1/4" ID tubing.

Water Control Valves:

6 stainless steel control valves, plastic lever cock valve with barb for

1/4" ID tubing mounted on rear of the hood.

Included Accessories:

6" resin diamond pad set (14,000 mesh)

Three 6" Polytex pads (adhesive backed)

Three diamond paste syringes

8,000, 14,000, 50,000 mesh diamond paste

6" leather buffing pad

3M On-Off cement

Submersible electric water pump

Water pump tubing

Loc-Line magnetic manifold and nozzle links/tips

GFCI Switch (110 volt units only)

GP6-6 WHEEL CAB MAKER

SPECIFICATIONS