Barranca Diamond GP6-6 Wheel Cab Maker - Manual (Page 22)

22
ARBOR ASSEMBLY
The GP6-6 Wheel Cab Maker is equipped with a 5/8" OD arbor shaft, mounted directly to the motor.
Fig 28 - Hood attachment knobs.
ELECTRIC MOTOR
The GP6-6 Wheel Cab Maker is equipped with a Baldor 1/3 HP 1800 RPM single-phase 110 volt 60
Hz 3.6 amp motor. The motor shaft has sealed ball bearings and requires no lubrication. If the motor
over heats and does not restart after a cool down period, remove the motor and have an authorized
repair service center for Baldor inspect the motor. Barranca Diamond can refer you to an authorized
motor repair service center in your area.
SUBMERSIBLE PUMP
Periodically the pump needs to be cleaned, refer to the pump manual on the submersible water
pump.
GP6-6 WHEEL CAB MAKER MAINTENANCE