5plain “as-is” style, 6decorative trim style – Bakers Pride FC-816 Manual User Manual
Page 13

13
Your IL FORNO CLASSICO oven(s) may be used “as-
is” without decorative finishes or architecturally
designed facades. For best-looking results consider
your preference for stainless steel doors or black
powder coated doors with wood handles and other
exterior finish options.
Oven(s), decks and legs are shipped in separate
cartons.
Uncrate, attach legs, install decks then
connect gas and electric utilities. Refer to operating
instruction manual
for details .
provided with oven(s)
Rather than 'building-in' your oven(s) or applying
masonry finishes directly to the oven(s) exterior,
consider finishing your oven(s) with decorative trim-
pieces of brass, copper, powder-coated colored trim or
L-shaped tile pieces.
For best looking results, consider an all stainless steel
exterior finish.
Control panel access cover,
combustion chamber door and flue-front may be
ordered in black-powder-coated finish or stainless
steel.
Metal trim pieces are fastened by the foodservice
equipment contractor directly to the oven exterior using
3/8” to 1/2” sheet metal screws. Pre-drill holes for best
results.
The design is only limited by your imagination.
Consider finishing the lintel plate with matching
materials, tile, stone or stainless steel. Stainless steel
lintel plate provided when ordering the all stainless
exterior option.
5
PLAIN “AS-IS” STYLE
Plain, AS-IS ready to use. No decorative finish.
Available with standard front or all stainless steel
exterior.
6
DECORATIVE TRIM STYLE
Finished with decorative trim-pieces of brass,
copper, tile etc. In standard front or all stainless
steel exterior.
PLAIN “AS-IS” STYLE INSTALLATION
DECORATIVE TRIM STYLE INSTALLATION
Disclaimers: Continuous product improvement is a policy of Bakers Pride. Therefore specifications and designs are
subject to change without notice. Ultimately, the proper design and execution of any appliance installation is the
responsibility of the property owner. That party or their representative is expected to engage the service of a qualified
professional to carry out that responsibility. This includes matters of compliance with local codes. The above
information is provided as guidelines to the installation professional. Job site conditions vary considerably, and
therefore Bakers Pride Oven Company can assume no responsibility or liability for the proper installation and
operation of the gas-fired appliance. The above assumes certain conditions, which are specified. A quality
professional may modify these recommendations as job site conditions dictate. For example, 70°F air is assumed.