Autoquip FREIGHTLIFT FLHC - Manual (Page 90)

90
CABLE (WIRE ROPE) ADJUSTMENT PROCEDURE (Figures 38 & 39)
DANGER !!!
To avoid personal injury or death, this procedure should only be performed
by qualified service personnel.
4½" of adjustment is available in 1½" increments for the lifting cables.
Adjustment is made by changing the clevis pin between four sets of holes in the dead
head clevis and mounting bracket. The mounting bracket is located on the outside of
the masts, at the top, near the masthead. The carriage should be at the lowest floor
level when this adjustment is performed.
WARNING !
To avoid serious injury or death, GUARDS, INTERLOCKS, and SAFETY
DEVICES must be restored to correct operation when installing parts or
making repairs.
GENERAL MAINTENANCE