Appendix – Autoquip FREIGHTLIFT FLHC User Manual

Page 101

101

C. MECHANICAL

1 Lifting cables are installed properly (pp. 26,63,90-92)

a. correctly fed through the reeving path & running in sheaves?

b. cable adaptor/pins/swages are factory-supplied & undamaged?

c. Are lifting cables frayed or damaged ?

d. Are the sheaves undamaged and turning freely ?

2 Guide wheels – turn smoothly & square to beams? (pp.38-40)

3 Carriage top-stop bolts are even & undamaged ? (p.54)

4 Field-bolting – grade 8 bolts, tightened per spec (pp.36,40,75)

a. Uprights to wheel guide blocks? (99 ft-lbs) (p.40,43)

D. HYDRAULIC

1 Is the reservoir oil level and color acceptable? (p.26,54,76,77)

2 Any cut/damaged/frayed hydraulic hoses ?

3 Are all hoses and fittings rated for high pressure service?

4 Power unit or components modified in any way?

5 Are there visible leaks at any hydraulic connections?

6 Evidence of Teflon tape used at threaded joints/fittings? (p.26,83)

7 Is the suction filter clogged ?

8 Do the cylinders show signs of leaking?

9 Is the relief valve set to open at 3000-3200 psi ? (p.15)

APPENDIX