Autoquip FREIGHTLIFT FLT - Manual (Page 28)

28
INSTALLER GUIDELINES/RESPONSIBILITIES
C. Travel limit switches must be installed and working properly.
D. Ensure proper operation and engagement of motor and carriage brake assemblies.
9. TESTING
A. Test up and down speeds.
B. Test all limiting devices, gate interlocks, gate status switches, sensors, and any other
safety features or devices as outlines by the Installation and Service manual.
C. Some states or municipalities may require testing of the carriage free-fall arrest
system (carriage brakes, slack chain/cable brakes, etc.) – consult the local
regulatory agency or the manufacturer.
10. CLEAN-UP & HAND-OFF
A. Ensure that all necessary adjustments to the interlocks, gate status switches, upper &
lower lift status limit switches allow proper operation of the lift and its safeties per the
manufacturer’s requirements.
B. Apply proper signage to all locations of the installation per the guidelines in the
Installation and Service manual. Consult the manufacturer if labels appear to be
missing or damaged.
C. Clean up any spilled oil from the area.
D. Train key personnel on the operation of the system and all safety features and
procedures.