Safety practices – Autoquip PLTC DOCK LIFT User Manual
Page 7
7
WARNING !
Do not make modifications to the lift such as extending the platform length
or width, this could cause the platform to tip. Do not add unauthorized or
unspecified components to the lift. Modifications to the lift can result in
unsafe operating conditions which could lead to serious injury or death.
WARNING !
Do not operate this equipment without handrails and snap chains in place.
WARNING !
Under no circumstances should the down flow control valve be removed
from the Deltatrol or the Contractor Power Unit to obtain faster lowering
speed. A loaded lift can reach dangerous and destructive speed.
WARNING !
Do not attempt to remove the velocity fuse until the maintenance block
securely supports the lift and all hydraulic pressure has been removed from
the lifting cylinders and hydraulic hoses. Failure to do so could results in
personal injury or death.
WARNING !
To avoid personal injury, stand clear of scissors leg mechanism while lift is
in motion.
SAFETY PRACTICES