Autoquip PLTC DOCK LIFT - Manual (Page 6)

6
Read and understand this manual and all labels prior to
operating or servicing the lift. All labels are provided in
accordance with ANSI Z535.4.
DANGER !
Do not work under the lift without a Maintenance Device! To avoid
personal injury, NEVER go under the lift platform until the load is removed
and the scissors mechanism is securely blocked in the open position. See
"Lift Blocking Instructions" section.
DANGER !
Do not install the lift in a pit unless it has a bevel toe guard or other
approved toe protection. A shear point can exist which can cause severe
injury to the foot.
DANGER !
HIGH VOLTAGE!! Disconnect and/or lock out the electrical supply to the
power unit prior to any maintenance being performed.
DANGER !
Scissors lifts are designed individually for a specific load and application.
To avoid personal injury, do not change the load or application from the
original design.
DANGER !
Failure to relieve lift system pressure could result in the sudden and
unexpected release of pressure during maintenance and/or repair of the lift
and result in severe injury to the personnel and/or damage to the lift.
SAFETY PRACTICES