Autoquip SERIES 35 SCISSORS LIFT - Manual (Page 5)

5
1.2.2 Inspection & Maintenance
Lift must be inspected and maintained in accordance with Autoquip’s operating/maintenance (O&M)
manual and with other applicable safe operating practices.
1.2.3 Removal From Service
Any lift not in safe operating condition such as, but not limited to, excessive leakage, missing parts or
fasteners, any bent or cracked structural members, cut or frayed electric, hydraulic, or pneumatic lines,
damaged or malfunctioning controls or safety devices, etc. shall be removed from service until it is
repaired to the original manufacturer’s standards.
1.2.4 Repairs
All repairs must be made by a qualified technician in conformance with Autoquip’s instructions.
1.2.5 Operators
Only trained personnel and authorized personnel shall be permitted to operate lift.
1.2.6 Before Operation
Before using lift, operator must:
• Read and/or had explained, and understood, manufacturer’s operating instructions and safety
rules.
• Inspect lift for proper operation and condition. Any suspect item must be carefully examined and a
determination made by a qualified person as to whether it constitutes a hazard. All items not in
conformance with Autoquip’s specification must be corrected before operating lift.
1.2.7 During Operation
Use lift in accordance with Autoquip’s O&M manual.
• Do not overload lift.
• Verify all safety devices are operational and in place.
• Autoquip warrants this lift for 60,000 cycles each warranty year. This number of cycles represents
normal, single shift duty. Exceeding this number of cycles shortens life of lift and length of your
warranty.
1.2.8 Modifications Or Alterations
Modifications or alterations to this equipment may be made only with written permission of Autoquip.
Unauthorized modification or alteration will void warranty.