Autoquip SERIES 35 SCISSORS LIFT - Manual (Page 10)

10
Prevent serious injury or death.
Depending on model, standard weight of lift ranges from 500 – 4700 lbs.
Use a properly rated lifting device to move and install lift.
3.3
Operation
Prevent serious injury or death.
Scissor lifts are designed for a specific load and application. Do not
change load or application from original design.
Overloading, or uneven loading, could result in load instability and cause
serious personal injury.
Stay clear of lift while lift is in motion.
Never stand, sit or ride on lift unless equipped with OSHA-compliant
personnel guarding on the platform.
Prevent serious injury or death.
Lifts which travel to an elevation above floor level where distance between
floor and the underside of lift platform exceeds 60" must have the
scissors mechanism guarded per ANSI MH29.1.
3.4 Hydraulics
Fluids can be hazardous. Before servicing lift, check Material Safety Data Sheet (MSDS) to understand
the product, safe handling procedures, and first aid measures relating to product. Follow this information
when servicing or repairing lift.
Do not drain or pour any fluids or lubricants into ground. Check with local environmental agencies,
recycling centers, or your Autoquip dealer for correct disposal information.
Any time velocity fuses have been tripped, investigate cause of trip and
verify necessary corrective actions have been taken prior to operation of
lift.
^ WARNING
^ WARNING
^ WARNING
^ CAUTION