Atop Technology SE8502-M12 Quick Start - Manual (Page 2)

Product Description
Mechanical Dimensions
Interfaces
LAN port pin assignment
Serial port
(8-pin female shielded
M12 socket with A coding)
and LED indicator
10/100BaseT(X) port
(4-pin female shielded M12
socket with D coding) and
indicator
Power input
(5-pin female shielded M12
socket with A coding) and
LED indicator
Serial port pin assignment
Power port pin assignment
NC = Not Assigned
Note:
Proper grounding will minimize the effects of noise due to electromagnetic
interference (EMI). Please install the ground connection from the ground screw to
the grounding surface before connecting the device.
Front View
Rear View Side View Top View
Without DIN-Rail
Grounding
Warranty Policy
─ Any changes to this material will be announced on Atop's website. ─
Warranty Conditions
Products supplied by Atop Technologies are covered in this warranty for sub-standard
performance or defective workmanship.
The warranty is not, however, extended to goods damaged in the following circumstances:
(a) Excessive forces or impacts
(b) War or an Act of God: wind storm, fire, flood, electric shock, earthquake
(c) Use of unqualified power supply, connectors, or unauthorized parts/kits
(d) Replacement with unauthorized parts
RMA and Shipping Costs Reimbursement
Customers shall always obtain an authorized "RMA" numberfrom Atop before shipping the
goods to be repaired to Atop. When in normal use, a sold product shall be replaced with a
new one within 3 months after purchase. The shipping cost from the customer to Atop will
be reimbursed by Atop.
After 3 months and still within the warranty period, it is up to Atop whether to replace the
unit with a new one; normally, as long as a product is under warranty, all parts and labor
are free of charge to the customers.
After the warranty period, the customer shall cover the cost for parts and labor.Three
months after purchase, the shipping cost from the customer to Atop will not be reimbursed,
but the shipping cost from Atop to the customer will be paid by Atop.
Limited Liability
Atop shall not be held responsible for any consequential losses from using Atop’s product.
Warranty Period
Rear View Side View Top View
Grounding
With DIN-Rail
The warranty certification will not be effective until an authorized stamp issued
by Atop’s overseas agents.
Purchase Date: / / (yyyy/mm/dd)
Serial Number:
Atop Customer Services and Supports
1. Please contact your local dealers or Atop Technical Support Center at the
following numbers.
+ 886-3-550-8137 (Atop Taiwan) / + 86-21-6495-6232 (Atop China)
2. Please report the defected problems via Atop’s Web site or E-mail account
Web Site：www.atop.com.tw, e-mail：[email protected]
Web Site：www.atop.com.cn, e-mail：[email protected]
Warranty Product Categories
Ethernet Switches
Wireless
Serial Device Servers
Modbus Gateways
Embedded Device Servers
DIN-Rail Power Supplies
Power Adaptors
Antennas
Other Accessories
5 Years
1 Year
3 Years