ArcOne Clean Air Flow - Manual (Page 5)

1.0 General Information
1.1 Introduction
Congratulations! You have purchased the ultimate in comfortable welding
powered respiratory protection equipment manufactured in the world today.
The complete CLEAN AIR FLOW
TM Powered Air Purifying Respirator System is
offered in four distinct lightweight headtops: Straight Bill and Reverse Bill Hard
Hat Visor Combo, Vision and Viper welding helmets. The welding helmets in-
clude ArcOne’s family of electronic auto-darkening fi lters. (See ArcOne’s Auto-
Darkening Welding Helmets “User Instruction Manual,” for details on ArcOne’s
welding helmets and auto-darkening lenses). The Hard Hats allow faceshield
and welding helmets to be used as accessories on the headtops, opening up
a large range of options (see approval label) to the user.
The Clean Air Flow TM Powered Air Purifying Respirator System blows a sup-
ply of fi ltered air over the welder’s face, creating a protective positive pressure
inside the face collar, that keeps out harmful gases, vapors and particulates,
and offers additional comfort when working conditions are hot and humid.
Our goal is to make your demanding job comfortable and safe. The Clean Air
Flow
TM system is not only engineered for safety and functionality but also for
lightweight comfort. You can wear the Clean Air Flow TM system all day with no
worry of fatigue or respiratory stress.
To assure your complete satisfaction with the Clean Air Flow TM system, we ask
that you read these user and safety instructions thoroughly before using the
system. PLEASE, also take the time to read the Auto-Darkening Welding
Helmets- “User Instruction Manual” (if applicable) which is enclosed.
The complete Clean Air Flow TM System has been engineered for:
TOTAL PROTECTION to the user - (1) Clean Air Flow TM POW-
ERED AIR PURIFYING RESPIRATOR
-
Filters the air that a user
breaths into his or her lungs. (2) ARCONE’S AUTO-DARKENING
LENS - Protects the eyes, and prevents against neck injuries (3) VI-
PER and VISION SERIES WELDING HELMETS
-
Ergonomically de-
signed to protect the face, head, and neck areas during welding.