APG LPU-2127 user manual - Manual (Page 18)

LPU-2127 Rev. A5, 1/14
18
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Mode Sheet (continued)
MODE DESCRIPTION PARAMETERS EXPLANATION
10 Offset Distance Range =-999 - +999
Default = 0
11 Temperature Range = 0 - 2
Compensation Default = 1
0 = OFF
1 = ON
2 = View/ON
12 Autosense Range = 0 - 1
Default = 1
0 = OFF
1 = ON
13 Sensitivity Range = 0 - 100%
Default = 100
14 Blanking Units = Mode 1
Range = 0.5 to 16 ft.
Default = 1.00
15 Pulses Units = Pulses
Range = 1 - 20
Default = 16
16 Software
Version
17 Reset Range = 0 - 1
Default = 0
Sets an offset for the display.
Activates or deactivates internal
Temperature Compensation.
Activates or deactivates AutoSense.
Sets to top sensitivity level. Zero is
the lowest sensitivity settomg and
100 is the highest.
Sets a dead zone in front of the
transducer where echoes are
ignored.
Sets the number of ultrasonic
pulses transmitted in each burst. 20
being the strongest transmit setting.
Displays the Software Version
Resets the mode parameters to their
default values. Entering a 1 will
reset the parameters.