Anchor CLASSIC SOLID SAFETY POOL COVER - Manual (Page 7)

7
DECK
COVER
POOL EDGE
RUBBER TIE
(TYP.)
CABLE
SPA
STEP 4
:
ALIGNING POOL COVER
1) Once cover is unfolded across pool, line up cutouts for ladders, slide legs, etc. and/or cable
areas, be sure the cover aligns properly with these objects first. See important note page 12.
2) Reposition cover to equal the overlap all around pool edge.
3) If cable is needed, see Optional Cable Assembly Installation Instructions (pages 13 & 14).
Otherwise, proceed to STEP 5.
STEP 5
:
ATTACHING RUBBER TIES
1) Attach rubber ties around cover.
2) Take the split connection end of the rubber tie, align holes with grommet (around outer edge of
cover) and attach with saw bolt. See illustration below.
GROMMET
RUBBER TIE
SOLID COVER
SAW
BOLT