Anchor CLASSIC SOLID SAFETY POOL COVER - Manual (Page 10)

10
INSTALLING BRASS ANCHORS AT CORNERS
FIG. 3
STEP 7
:
PLACEMENT OF PUMP
CALL ANCHOR POOL COVER SALES @ 1-800-255-5552
TO CLARIFY INSTALLATION INSTRUCTION QUESTIONS.
Place pump onto the cover at the geographical center of the cover. The
pump rating must be 1200 gph or more. The cover will present a hazard
and will not meet safety cover criteria without a pump.
STEP 8
:
INSPECTION AND CLEAN-UP
1) After the cover has been installed, look for any area (besides that reinforcement attached to
the cover during manufacturing) that may need protective padding on the underneath side of
cover. On site padding may consist of carpeting, vinyl liner remnants, etc.
Complete the installation by sweeping any concrete dust.
Deliver the door knob pack with warranty and user information to the homeowner.
90º
90º
1”
1”