2 layout at site, 3 lacing instructions, Staking guidelines – Anchor CENTURY 40 WIDE User Manual
Page 4
2 LAYOUT AT SITE
Drive stakes at points located. Each 2’ stake bar
requires 3 stakes. A 4’ stake bar requires 6 stakes.
Spread drop cloths and unroll tent.
Any objects with sharp projections which must
remain on site under the tent should be padded and
taped.
NOTE: Both Loop side and hole side of sections
are required for proper lace.
LACE
END
MIDDLE
END
3 LACING INSTRUCTIONS
With tent sections on ground, overlap center pole
holes with grommet side on top.
Lace between center pole holes first. Push first
loop up through corresponding grommet. Continue,
passing each loop through a grommet and the pre-
ceding loop.
Continue lacing process and cover lacing with pro-
tective rain flaps by velcroing the short flap first,
then snapping the top flap to the rope as you move
toward other center pole hole.
Tie off last long loop.
MIDDLE
END
CENTER POLE
HOLE
END
4
SEE WEB GUY LAYOUTS FOR
STAKING CONFIGURATIONS.
STAKE BARS
STAKING GUIDELINES
(2) WEB GUYS WITH 4’
STAKE BAR AND (6) 42” DOUBLE
HEAD STAKES
(1) WEB GUY WITH 2’ STAKE
BAR AND (3) 42” DOUBLE HEAD
STAKES
(2) WEB GUYS WITH (2) 2’ STAKE BARS AND (6)
42” DOUBLE HEAD STAKES
CORNER WEB
GUYS
TENT
CORNER