Bosch B20CS5 - Manual (Page 8)

9
Explanation of the symbols on the display panel
Filter change required" display
After changing the filter, press the water
filter reset button for approx. 5 seconds
to switch off the display.
Water" display
Ice maker locked" display Crushed ice" display
Control panel locked" display Ice cubes" display
Switching on
the appliance
q Insert the main plug into
a socket.
The appliance begins to cool down
as soon as it is connected to the
power supply. When the doors are
open, the interior lights come on.
i The preset temperatures (factory
settings) are reached after
approx. 2 to 3 hours. Do not put
any food in the appliance
beforehand.
To change the set temperatures ć>
see Selecting the temperature".
Selecting the
temperature
The temperature for the refrigerator
and freezer compartments can be
adjusted separately. The set value is
indicated on the display panel.
The factory setting for the
refrigerator compartment is
39 ° F (4 ° C).
The factory setting for the freezer
compartment is 0 ° F (ć18 ° C).
To change the values:
q Keep pressing the Selection
button until the required
temperature value is indicated.
The value last indicated is saved by
the system.
Temperature unit
The temperature can be displayed in
degrees Fahrenheit ( ° F) or degrees
Celsius ( ° C).
q Press the lock button (1.).
q Press and hold down the reset
water filter button for 15
seconds.