AMMCO AC2000M Motorcycle Lift - Manual (Page 17)

Model: AC2000M
Installation, Operation & Maintenance
17 Rev: 4/13/11
QML02E-IOM-E
CHAPTER 4.
MAINTENANCE
4-1 General caution during
maintenance
1) Two or more persons should perform
maintenance.
2) Maintenance should be carried out after
putting a signboard of "NO ENTRANCE"
at work area.
3) Do not disassemble the system before
you are familiar with the disassembling
sequence.
4) Record the place or parts where
maintenance is needed.
5) Keep disassembled parts stored where
they can be easily accessed.
6) Be sure to fasten bolts and nuts position
correctly during assembly.
7) During maintenance, verify locks are in
“engaged” position.
8) Check weekly for loose nuts and bolts.
Retighten if needed.
4-2 Check List and periodic maintenance
Maintenance Interval Chart
The following chart should be considered strictly as a guide to general maintenance
intervals. Depending on operating conditions, the intervals of maintenance should be
changed