BT LYRIC 2500 - Manual (Page 25)

25
BT Lyric 2500 – Edition 2.1 – 02.07.04 – 6121
Dial mode
The available settings are tone and pulse.
1. Press or until Base Settings is displayed then
select OK option.
2. Press or until Dial Mode is displayed then select
OK option.
3. The current setting is highlighted. Press or to
highlight the dial mode you require.
4. Select OK option and you will hear a confirmation tone.
5. Press and hold to exit and return to standby.
Change the base PIN
Your BT Lyric 2500 has a base PIN code which you will
need to change some of the base settings. You may wish
to change this to prevent unauthorised changes to your
settings.
1. Press or until Base Settings is displayed then
select OK option.
2. Press or until PIN code is displayed then select
OK option.
3. PIN code? is displayed. Enter your current 4 digit code
(default 0000 ) and select OK option.
Base settings
Default (original setting) is Tone.
Default PIN is 0000
Please note that when ? is
displayed you must enter the digits
using the keypad before selecting
OK.