Allen&Heath GL4800 USER GUIDE - Manual (Page 31)

GL4800 User Guide 31
The Mute Switch
Press MUTE once to mute the channel signal.
The red LED will turn on.
The audio signal will turn off (channel muted).
Mute affects the post-fade signal and will also affect the
pre-fade signal if the internal option links are configured
to do so (factory default setting).
Press MUTE again to turn the mute off.
Turn All Console Mutes Off or On
It is often useful to turn off (clear) all the console mutes or to turn them
on (set). You may wish to clear the console before starting a new
scene or setting up a new group or snapshot. Alternatively you could
set all mutes on and work with just the active channels. Once cleared
or set in this way you can overwrite and edit selected groups and
snapshots, or all 128 snapshots using the 'ALL' function as a starting
point for a new show.
Turn All Console Mutes Off
Press SHIFT + RECALL
The red LED will start flashing.
The display flashes CLr
Press any other key to cancel or
Press RECALL to confirm.
The LED will turn off.
All console mutes will turn off.
Turn All Console Mutes On
Press SHIFT + RECALL
The red LED will start flashing.
The display flashes CLr
Press SHIFT + RECALL again.
The display flashes SEt
Press any other key to cancel or
Press RECALL to confirm.
The LED will turn off.
All console mutes will turn on.
EDIT
SAFES
RECALL
PREVIEW
STORE
IN-PLACE
SOLO
SNAPSHOT
<
>
MIDI
CHANNEL
ACTIVE
PATCH
MODE
SHIFT
DISABLE
AUTO
INCREMENT