AirLive WHA-5500CPE-PCBA - Manual (Page 52)

3. Basic Configuration
3.7 Client Adhoc Mode Settings
Advanced Setting >> Operation Mode >> Client Adhoc
Select “Client Adhoc” mode and then click APPLY button.
3.7.1 Wireless Settings
Advanced Setting >> Wireless Settings
RTS Threshold: RTS/CTS frames are used to gain control of the medium for transmission.
Any unicast (data or control) frames larger than specified RTS threshold must be
transmitted following the RTS/CTS handshake exchange mechanism. The RTS threshold
should have a value between 256-2347 bytes, with a default of 2347. It is recommended
that this value does not deviate from the default too much.
Fragmentation: When the size of a unicast frame exceeds the fragmentation threshold, it
will be fragmented before the transmission. It should have a value of 256-2346 bytes, with a
default of 2346. If you experience a high packet error rate, you should slightly decrease the
Fragmentation Threshold.
AirLive WHA-5500CPE User’s Manual 46