1 wireless settings – AirLive WHA-5500CPE-PCBA User Manual
Page 51
3. Basic Configuration
3.6.1 Wireless Settings
Advanced Setting >> Wireless Setting
RTS Threshold: RTS/CTS frames are used to gain control of the medium for transmission.
Any unicast (data or control) frames larger than specified RTS threshold must be
transmitted following the RTS/CTS handshake exchange mechanism. The RTS threshold
should have a value between 256-2347 bytes, with a default of 2347. It is recommended
that this value does not deviate from the default too much.
Fragmentation: When the size of a unicast frame exceeds the fragmentation threshold, it
will be fragmented before the transmission. It should have a value of 256-2346 bytes, with a
default of 2346. If you experience a high packet error rate, you should slightly decrease the
Fragmentation Threshold.
Transmit Power: Transmit power output depends upon the size and RF characteristics
because that will determine the number of APs, channels, and need for antennas.
Ack TimeOut (11a): The "ACK time-out" determines how long the program waits after
receiving a packet from a file stream to determine that stream to be a complete file. For
details, please go to
.
45
AirLive WHA-5500CPE User’s Manual