AirLive WHA-5500CPE-PCBA - Manual (Page 40)

3. Basic Configuration
and Ack-policy.
3.3.4 RADIUS Settings
Advanced Settings >> RADIUS Setting
RADIUS servers provide centralized authentication services to wireless clients. Two
RADIUS servers can be defined: one acts as a primary, and the other acts as a backup.
MAC address filtering based authentication requires a MAC address filter table to be
created in either the WHA-5500CPE (as described in Chapter 3.2.3 MAC Filtering Settings)
and/or the RADIUS server. During the authentication phase of a wireless station, the MAC
address filter table is searched for a match against the wireless client’s MAC address to
determine whether the station is to be allowed or denied to access the network.
To Enable RADIUS Server:
Server IP: The IP address of the RADIUS server.
Port Number: The port number that your RADIUS server uses for authentication. The
default setting is 1812.
RADIUS Type: RADIUS
Shared Secret: This is used by your RADIUS server in the Shared Secret field in RADIUS
protocol messages. The shared secret configured in the WHA-5500CPE must match the
shared secret configured in the RADIUS server. The shared secret can contain up to 64
AirLive WHA-5500CPE User’s Manual 34