AirLive WHA-5500CPE-PCBA - Manual (Page 31)

3. Basic Configuration
3.2.2 SYSTEM MANAGEMENT
Advanced Settings>> System Management
Clicking the System Management button to configure system related parameters to for the
WHA-5500CPE.
HTTP Port No.: HTTP stands for Hyper Text Transfer Protocol. The default port for the
HTTP Web server is 80.
Time-out: This setting specifies the duration of idle time (inactivity) before a web browser
or telnet management session times out. The default is 10 minutes.
UPnP: The Universal Plug and Play (UPnP) feature allows a Windows XP/ME PC to
discover this WHA-5500CPE and automatically show an icon on the screen. Then a user
can double-click the icon to access this device directly (without having to find out its IP
address).
Syslog: Syslog is an IETF (Internet Engineering Task Force - the Internet standards
body)-conformant standard for logging system events (RFC-3164). When the
WHA-5500CPE encounters an error or warning condition (e.g., a log-in attempt with an
invalid password), it will create a log in the system log table. To be able to remotely view
such system log events, you need to check the Enable Syslog box and configure the IP
address of a Syslog daemon. When doing so, the WHA-5500CPE will send logged events
over network to the daemon for future reviewing.
Syslog server IP address: System event messages generated by the wireless access
point will be sent to a Syslog daemon running on a server identified by this IP address.
25
AirLive WHA-5500CPE User’s Manual