AirLive WHA-5500CPE-PCBA User Manual
Page 45
3. Basic Configuration
will be fragmented before the transmission. It should have a value of 256-2346 bytes, with a
default of 2346. If you experience a high packet error rate, you should slightly decrease the
Fragmentation Threshold.
DTIM Interval: The WHA-5500CPE buffers packets for stations that operate in the
power-saving mode. The Delivery Traffic Indication Message (DTIM) informs such
power-conserving stations that there are packets waiting to be received by them. The DTIM
interval specifies how often the beacon frame should contain DTIMs. It should have a value
between 1 to 255, with a default value of 3.
User Limitation: The range of user limitation is from 1 to 100.
Age Out Timer: Set the age out time. The default is 300 sec.
Transmit Power: Transmit power output depends upon the size and RF characteristics
because that will determine the number of APs, channels, and need for antennas.
Ack TimeOut (11a): The "ACK time-out" determines how long the program waits after
receiving a packet from a file stream to determine that stream to be a complete file. For
details, please go to
.
Enable Radio eXtended Range: Select the check box to enable the Atheros’s eXtended
Range(XR) technology to extend the wireless coverage range.
Enable privacy separator: Select the check box to prohibit data transmission between
client stations.
39
AirLive WHA-5500CPE User’s Manual